Epson 11880 - Stylus Pro Color Inkjet Printer User Manual Download Page 152

Page: 152 / 182

Problem Solver

152

User’s Guide

INK CARTRIDGE
THIS MAY VOID EPSON’S
WARRANTY.
DO YOU ACCEPT THIS?
<ACCEPT DECLINE>

Non-genuine ink
cartridge is installed.
This may void EPSON’s
warranty.

Select

DECLINE

(press the

button) to

replace the ink cartridge with a genuine
Epson ink cartridge. Selecting

(press

the

button) may void EPSON’s warranty.

See “About ink cartridges” on page 124.

See “Replacing ink cartridges” on page

125.

INK CARTRIDGE ERROR
PLEASE INSTALL THE CORRECT
CARTRIDGE

An ink cartridge that
cannot be used with
this printer is installed.

Remove the ink cartridge, and install an ink
cartridge that can be used with this printer.

See “About ink cartridges” on page 124.

See “Replacing ink cartridges” on page

125.

INK CARTRIDGE ERROR
CHECK CARTRIDGE
REFER TO THE MANUAL

An ink cartridge with
the wrong product
code is installed.

Remove the ink cartridge, and install an ink
cartridge with the correct product code.

See “Replacing Ink Cartridges” on page

122.

INK CARTRIDGE
REPLACE INK CARTRIDGE

The ink cartridge is
expended.

Replace the ink cartridge with a new one.

See “Replacing Ink Cartridges” on page

122.

COMMAND ERROR
CHECK DRIVER SETTINGS

Damaged data has
been sent to the
printer.

Stop printing, and press the

button for 3

seconds.

The printer receives
data with a wrong
command.

The installed printer
driver is not correct for
the printer.

Stop printing, and press the

button for 3

seconds. Then make sure that the installed
printer driver is correct for the printer.

PAPER CUT ERROR
PRESS THE MENU BUTTON TO
MOVE THE CUTTER TO
REPLACEMENT POSITION

Paper is not cut
correctly when Roll
Auto Cut On

selected.

❏

Release the paper lever, and then
remove the uncut paper. Finally, set the
paper lever to the secured position.

See “Feeding or ejecting troubles” on

page 164.

❏

Paper cutter may be blunt. Replace the
paper cutter.

See “Replacing the Cutter” on page

128.

PAPER CUT ERROR
REMOVE UNCUT PAPER

(The following messages also
appears:

OPEN FRONT COVER TO SEE
CUTTER REPLACEMENT LABEL.

SEE LABEL TO REPLACE CUTTER

CLOSE FRONT COVER)

PAPER SKEW
LOAD PAPER PROPERLY

The paper is not
loaded straight.

❏

It may not be printed in the printable area
properly.

❏

Load the paper straight.

See “Using Roll Paper” on page 29.

See “Using Cut Sheet Media” on page

35.

Error messages

Description

What to do

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer























































































































































































Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 11880 - Stylus Pro Color Inkjet Printer, User Manual

Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands