All rights reserved. No part of this Manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording or by any information storage or retrieval system, without permission in writing from the publisher.
Doc #: EC501 / Rev. 1 / Effective Date: October 17, 2014
21
The ground attendant must remain at a safe distance from the Model 800
during deployment and to pay special attention with cutting Enviro™
Cover and attaching it to the Film Clips. Contact with the Side Feeders
must be avoided at all times.
Specific guidelines for Enviro™ Cover Deployer Model 800:
1)
The ground attendant can work from the lower
or upper decks but not the working face. The
ground personnel’s function is to cut the EC at
the end of the panel and secure the EC onto the
EC film clips in preparing the Model 800 for next
deploy panel.
Note: EC can be deployed in climatic weather
conditions. However, if the condition is
windy or if strong winds are anticipated
after deployment, use more ballast to
anchor EC.
Safety Decal
Figure 22: Anchor material is deposited
onto EC
!
