EPA SM-Ethernet, User Manual

Page: 98 / 133

SM-Ethernet User Guide
97
Issue: 7
Sa
fety
in
fo
rm
at
io
n
In
trod
uc
tion
Me
cha
nical
in
stal
lat
ion
El
ec
tric
al
ins
tall
ati
on
Get
tin
g
st
arted
Pr
ot
oc
ol
s
We
b p
ag
e
ba
si
cs
FTP
/c
ustom
pa
ge
s
A
ppli
catio
ns
S
ecu
rity
Di
ag
nost
ics
Adv
anc
ed
fe
atur
es
Q
uick
re
fe
re
nc
e
Glossa
ry
o
f
te
rm
s
In
de
x
Table 11.3 Duplex mode
If this parameter value is changed, then a module save should be performed
(
xx.00 =1000 or xx.00 =1001 if using a DC supply to power the drive) followed by
resetting the SM-Ethernet module ( MM.32 =ON) to activate the change.
11.4.16SM-Ethernet enable auto-crossover detection
This parameter is used to determine if the module should use auto-crossover detection
or use a standard (
patch ) cable. If it is set to 0 you either need a cross-over cable or you
need to connect via a switch.
Table 11.4 Crossover detection
If this parameter value is changed, then a module save should be performed
(
xx.00 =1000 or xx.00 =1001 if using a DC supply to power the drive) followed by
resetting the SM-Ethernet module ( MM.32 =ON) to activate the change.
11.4.17SM-Ethernet actual baud rate
Displays the baud rate at which SM-Ethernet is operating.
Table 11.5 Actual baud rate
11.4.18SM-Ethernet actual duplex mode
Displays the duplex mode that SM-Ethernet is currently using.
Pr MM.42 bit/s
0 Auto-detect.
1 full duplex.
2 half duplex.
SM-Ethernet - Enable crossover detection
Pr MM.43
Default 0 (disabled)
Range 0 to 1
Access RW
Pr MM.43 Crossover detection
0 Disabled.
1 Enabled.
SM-Ethernet Actual baud rate
Pr MM.44
Default 0
Range 0 to 2
Access R
Pr MM.44 Actual baud rate
0 Baud rate not set.
1 10Mbs.
2 100Mbs.
SM-Ethernet Actual duplex mode
Pr MM.45
Default 0
Range 0 to 2
Access R