EP Equipment LIST JX0, Service Manual

Page: 28 / 206

15
REV. 07/2019
MAINTENANCE
2
Table 2.1 Inspection & Maintenance List (Continued)
Interval in days/months/years 7 d 60 d 90 d 6 m 1y
Interval in hours 50 150 250 500 1000
Power Supply & Drive System
Check and lubricate the bearings between drive motor
and gearbox
A / L
Check the drive wheel and load wheel for worn or
damage
A
Check the wheel bearings and fixation A
Check the travel speed A
Hydraulic System
Check the functions of hydraulic system A
Check if the hoses, pipes and interfaces are fastened
or sealed securely, and check if there is damage
A
Check the cylinders for leaks A
Check the cylinders for damages and check the fixation A
Check the oil tank fixation and check for leaks A
Check the aux pump motor and check for leaks A
Check the hydraulic oil level A
Clean or replace the hydraulic oil
Replace after 100 hours of early operation.
Then replace once every 2000 hours
Check the function of emergency pressure relief
valve
A
Check and clean oil tank air filter A
Replace the oil tank air filter and filter A
Check the relief pressure A
A = Check / Adjust
Please refer to Inspection & Maintenance List
for regular inspection and maintenance of the
vehicles.
L = Lubrication
Under harsh conditions, the lubrication intervals
should be shortened by half.