![EP Equipment LIST JX0 Service Manual Download Page 105](http://html1.mh-extra.com/html/ep-equipment/list-jx0/list-jx0_service-manual_2417110105.webp)
REV. 07/2019
ELECTRICAL SYSTEM
8
92
A Interface
Pin No.
Signal Name
Description
A#16 DI10
Inching (Backing) function, backward direction input. It
must be connected to the inching backward switch.
A#17 DI8
Inching (Backing) function, forward direction input. It
must be connected to the inching forward switch.
A#18 DI11 /
CPOT3
Input of the switch DI11. The input is activated when the
external
switch is closed to -Batt. In the Sense Coil version this
input is
connected to the AC motor sense coil. It can be properly
configured via HW as additional analog input.
A#19
DI5
Input of the switch DI5. The input is activated when it is
connected
to +Batt. The default function is the controller “HORN”
input,
closing the switch the horn output is activated.
A#20 DI6
Input of the switch DI1. The input is activated when it is
connected
to +Batt. The default function is the controller “DESCENT”
enable
input.
A#21 DI12 /
CPOT4
Input of the switch DI12. The input is activated when the
external
switch is closed to -Batt. It doesn’t have a default function.
In the
Sense Coil version this input is connected to the AC motor
sense
coil. It can be properly configured via HW as additional
analog
input.
A#22 PTH
Traction motor thermal sensor input. The internal pullup is
a fixed
2mA (Max 5V) source current.
A#23 PTH
Auxiliary output. Internal 330R resistance in series to the
driver (driving to –Batt).
Max continuous current: 35mA.
Typical function: to drive a led. (driving to –Batt).
A#24
EVP 1
Negative of the lower proportional PWM current controlled
electrovalve driver (driving to –Batt).
A#25
PENC
Positive supply for external device (Encoder,
potentiometers, ecc)
(+12 /+5 V 150mA maximum)
Summary of Contents for LIST JX0
