EP Equipment LIST JX0, Service Manual

Page: 133 / 206

REV. 07/2019
ELECTRICAL SYSTEM
8
120
Parameters Description Remark
TDI1 SAFETY SW It is the status of safety switch on tiller
controller
ON +VB
DI14 SW NONE OFF GND
DI13 SW NONE OFF +VB
DI12 ADD LOW SW It is the status of addtional lower switch OFF +VB
DI13 ADD LIFT SW It is the status of addtional lift switch OFF +VB
DI10 SL.CH.NO SW It is the status of slack chains(NO) switch OFF GND
DI9 TR CTB 1 SW It is the status of cutback 1 switch ON +VB
DI8 SIDEGATE SW It is the status of lift sidegate switch ON +VB
DI7 SL.CH.NC SW It is the status of slack chains(NC) switch OFF +VB
DI6 LIFT STOP SW It is the status of lift stop switch OFF GND
DI5 TR CTB 2 SW It is the status of cutback 2 switch OFF GND
DI4 BACKWARD SW It is the status of backward switch OFF GND
DI3 FORWARD SW It is the status of forward switch OFF GND
DI2 TR CTB 3 SW It is the status of cutback 3 switch OFF GND
DI1 INCLIN.SENS It is the status of inclination sensor switch OFF GND
D10 DEADMAN SW Check the status foot switch OFF GND
PUMP VMN It is the voltage applied to the pump motor. %
DC PUMP CURRENT DC current in the pump motor.
Display the current value ( A
)
MOTOR TEMPERAT
This is the temperature of the motor windings
picked up
(A) with an analog sensor inside the motor.
D i s p l a y t h e c u r r e n t
temperature (
℃
)
TEMPERATURE
This is the temperature of the inverter base
plate.
(
℃
)