EOS Zeus S / EOS Zeus SL - Installation and Operating Instructions
EN-13
Identification
Heater guard rail (optional)
A heater guard rail may be placed around the upper edge of the heater. It
prevents accidental contact with hot parts of the heater.
2.4
Intended use
The EOS Zeus S/SL sauna heater is designed solely to heat sauna cabins
that have a regulator with the appropriate output capacity.
EOS Zeus S/SL is a free-standing sauna heater that is suitable for commer-
cially used cabins.
The heater is not suitable for outdoor use.
It must be operated only inside buildings and may not be
exposed to environmental conditions such as extreme humid-
ity and moisture or the possible formation of condensation or
corrosive substances in the ambient air, as well as other weather condi-
tions.
Any use beyond this is considered improper use. Proper use also includes
compliance with operating, maintenance and servicing requirements.
The manufacturer is not responsible for unauthorised modifications and
damages resulting from these modifications; the person modifying the
equipment alone shall bear the associated risk.
Foreseeable misuse
The following are considered instances of foreseeable misuse:
The unit is operated without knowledge of or compliance with the
safety instructions.
Operating, service and maintenance requirements are not observed.
The unit is operated by children or persons with reduced mental capac-
ity or by persons who have not been thoroughly instructed in its use.
Accessories (optional)
Item no.
Heater guard rail 270°
Walnut
94.7092
Abachi
94.7100
Heater guard rail 360°
Walnut
94.7093
Abachi
94.7101
Installation kit
94.6761
Sauna stones, approx. 25 kg
94.7337
