4.4.4.2 THE CHARGING UNIT
Fig. 23 The charging unit
The charging unit (A) is used for charging the internal battery modules of the container. It contains a charging
cable (B) and the following selection of adapters (C):
Table 3 Adapters included
Adapter
Specification
Part number
Swiss SEV 1011
10 A, 250 V
P/N 807M
BS 1363
13 A, 250 V
P/N 807P
Nema 5–15P
15 A, 125 V
P/N 807Q
CEE 7/7
16 A, 250 V
P/N 807R
AS/NZS 4417
10 A, 250 V
P/N 807S
4.4.4.3 CHARGE THE CONTAINER
Fig. 24 Take out the charging cable
1.
Open the door of the charging unit and take out as
much of the charging cable as needed.
WARNING!
Inspect the connector, in the loose charging cable
end, for residual water or other contamination.
NOTE!
It is allowed to use another charging cable than the
one provided. Make sure that the substitute cable is
rated for at least 16 A. Unplug the provided cable
from the socket and insert the substitute charging
cable. Provided adapters may be inserted directly into
the socket if necessary.
→
23 (40)
Doc No:
UM-RAP-1002
Revision:
0
State:
Released
Release Date:
2021-12-10
Approved By:
hanst
