Fig. 25 Connect an adapter
2.
If necessary, connect an adapter to the charging cable. The adapters are found on the inside of the
charging unit door.
Additional adapters can be ordered, refer to
4.4.4.4 Order additional charging adapters
.
NOTE!
Make sure that the hook on the charging cable connector locks into the lid of the adapter connector.
3.
Connect the plug or adapter to the power outlet. The green status indicator light flashes and the display is lit
throughout the charging. The display shows
Charging ongoing, currently at [XX] %
.
CAUTION!
Tripping hazard. Make sure that any excess cable is safely stowed away in the charging unit.
4.
When the green status indicator light changes from flashing to fixed and the display shows
Container fully charged
, the charging is completed. Disconnect the plug/adapter from the power outlet.
Fig. 26 Disconnect the adapter
5.
If applicable, disconnect the adapter from the charging
cable and return the adapter to the holder on the inside
of the charging unit door. Make sure that all five
adapters are in place.
→
24 (40)
Doc No:
UM-RAP-1002
Revision:
0
State:
Released
Release Date:
2021-12-10
Approved By:
hanst
