4.4.7.7 DISABLE CONNECTIVITY
When the connectivity is in automatic flight detection mode, the connectivity is automatically disabled when the
container comes close to an aircraft. If required, the connectivity can also be disabled manually at any time:
Fig. 34 Open the display lid
1.
Open the lid to the right of the display.
Fig. 35 Connectivity switch
2.
Toggle the connectivity between automatic flight detection mode and disabled:
• Connectivity switch towards
DISABLED
: The connectivity is disabled. The top icon in
is shown on
the display.
• Connectivity switch towards
AUTO
: The connectivity is in automatic flight detection mode. The lower icon
in
is shown on the display (empty if there is no reception, filled if there is reception). If the
connectivity switch is switched towards
AUTO
while the container is close to an aircraft, the connectivity
will not be turned on until the container has left the aircraft.
→
32 (40)
Doc No:
UM-RAP-1002
Revision:
0
State:
Released
Release Date:
2021-12-10
Approved By:
hanst
