Envirotainer 140020R, User Manual, Page: 33 / 46

4.4.7 Operating the display unit
4.4.7 OPERATING THE DISPLAY UNIT
NOTE!
If the display is dark, the display is in sleep mode, but the container is operating.
The container has no power or on/off button, but the temperature control can be turned on/off.
4.4.7.1 THE DISPLAY UNIT
Fig. 30 Overview of the display unit
Table 5 Display unit features
Pos Description Pos Description
A Buttons E USB connector (not in use)
B Display F Hatch
C Status indicator lights G Locking knob
D Connectivity switch
4.4.7.1.1 Display
Fig. 31 The shipment status overview
The default view when the display is turned on is the
shipment status overview. If there is an active alarm or alert,
the shipment status overview is temporarily replaced by an
alarm/alert message.
Refer to
4.4.7.5 View and address active alarms and
alerts .
The display enters sleep mode one minute after the last
interaction, and wakes up at the touch of a button. If an
alarm or alert is activated when the display is in sleep mode,
the display is automatically lit and stays lit for 90 seconds.
The buttons underneath the display are used to navigate in
the menu and settings.
If preferred, the display may be locked for input. Refer to
4.4.7.8 Lock and unlock the display unit for input .
The shipment status overview contains the following information ( Fig. 31 and Table 6 ):
27 (40)
Doc No:
UM-RAP-1002 Revision:
0 State:
Released Release Date:
2021-12-10 Approved By:
hanst