Section 3 – Menus
22 |
P a g e
3.3.3. Counter menu
38
End Count
9999
Reset Count
˄
˅
Enable
Counter
Stop at end
of count
Count
Dressings Done
1
Max Dressings
3
Enable
Tip Dress
Reset to
0
i
Counter: Electrode 0
3.3.3.1. Enable Counter (parameter)
Checking this box enables counting.
3.3.3.2. Count (parameter)
The number of welds since the Counter was reset. The value is
also editable by tapping the field.
3.3.3.3. Reset Count
Pressing this button will reset the Counter to zero.
3.3.3.4. Dressings Done (parameter)
The number of times the electrode has been dressed.
3.3.3.5. Enable Tip Dress (parameter)
Checking this box enables the tip dress feature. If enabled, the
EN7000 will activate the Tip Dress Request output when the count
value reaches the value set in
End Count
.
3.3.3.6. Stop at End of Count (parameter)
Checking this box will inhibit further welding once the
Count
is
equal to the
End Count
.
3.3.3.7. End Count (parameter)
The end point for the counter.
