Section 3 – Menus
11 |
P a g e
3.2.4.6. Main heat (parameter)
Time interval for the main welding current.
3.2.4.7. Cool2 (parameter)
Time interval where no current is passed. For spot mode, there
must be more than 1 Pulsation in the
Program Options
menu to
use this feature.
3.2.4.8. Downslope (parameter)
Time interval for the welding current to change from the Main Heat
value to the Post-heat value.
3.2.4.9. Post-heat (parameter)
Time interval where the Post-heat current is applied. To use this
feature,
Post-heat
must be enabled in the
Program Options
menu.
3.2.4.10. Hold (parameter)
Time interval where the force is maintained and no current is
passed. Used to allow the nugget to congeal.
3.2.4.11. Off (parameter)
Time interval where the electrode force is released until the next
sequence begins.
Repeat
spot mode or
Roll-spot
mode must be
enabled in the
Program Options
menu to use this feature.
Extended
