Entes RG3-12C, Manual, Page: 24 / 41

POWER FACTOR CONTROLLER
RG3-12C/CS
3.11.a Entering the Energy Values
Using the “UP/DOWN” buttons, find the energy menu(EnErgy).
Press the “SET” to enter the energy menu. The first option in
the energy menu is the Active Import Export(A-I) value.
To enter the
“A-I”
value, press the “SET” button
(For the other energy types, press the “UP” button
and find the energy type value you want to enter
and press the
“SET” button to change that energy
value).
RG3-12C/CS has 2 energy counters. “Energy Counter 1” is the
energy counter which can be read from the measurement
parameters. “Energy Counter 2” can only be read from the devices
registers.
For “Energy Counter 1”; the energy value can be entered with “0,1
kWh/kVArh” precision for Active Import(A-I), Active Export(A-E),
Reactive Inductive(r-L) and Reactive Capacitive(r-C) energy types.
For “Energy Counter 2”; entering a value from the menu is not
possible. If communication for the device exists, the energy values
can be entered with “0,1 kWh/kVArh” precision for both counters.
Resetting the energy counters can be done from this menu. Energy
counters can also be conditioned to work with the generator input.
3.11 Resetting the Energy Counters and Entering
the Energy Values
Note:
This process is done the same way for Active Import(A-I),
Active Export(A-E), Reactive Inductive(r-L) and Reactive Capacitive(r-
C) energy types.
Active import energy value can be entered between “00000000.1
- 99999999.9”. Enter the desired value and press the
“SET”
button.
SAUE
If you want to leave the setup menu without making any other changes,
press the
“ESC” button until “SAVE SEt yES” shows on the screen. If
you want to save the changes, press the “SET” button. If not, press the
“ESC” button.
3.11.b Resetting the Energy Values
RG3-12C/CS has 2 energy counters. These counters can be reset
independently. Resetting is done the same way for both of the
counters.
Press the “SET” to enter the energy menu. The first option in the energy
menu is the Active Import Export(A-I) value.
Using the “UP/DOWN” buttons, find the energy reset menu
(Engy CLr En-1 / Engy CLr En-2).
To reset the energy counter 1, press the “SET” button.
Press the
“SET”
button for 3 sec. in order to enter to the
menu.
3 sec.
23