Entes RG3-12C, Manual, Page: 15 / 41

POWER FACTOR CONTROLLER
RG3-12C/CS
14
In this menu; alarms and ratios(reactive/active ratios) are reset.
The alarms which occur when the device operates are reset in this menu.
To reset the alarms,
“yES”
option must be selected.
Note : When an alarm occurs, the alarm relay switches on and the
related alarms LED turns on and the alarm code is displayed. Even if
alarm conditions disappear, the alarm relay will stay switched on. By
using the reset menu, alarms are reset and alarm relay is switched off.
If alarm conditions still exist, even if alarms are reset in the “reset”
menu, alarm relay switches on again. If alarm conditions disappeared,
alarm relay continues to its normal operation.
3.8.a Alarm Reset Setting
3.8 Reset Settings
Using the “UP/DOWN” buttons, find the reset menu option(rESEt). When
reset menu is selected, reset LED turns on.
Press the “SET” button to enter reset(rESEt) setting options.
Press the “SET” button to set the alarm(ALAr) setting which is the first
setting in the reset(rESEt) menu.
Using the “UP/DOWN” buttons, select
“yES”
to delete alarm values or
“no”
to cancel the delete process and then press
“SET”
button.
3.8.b Reactive/Active Ratio Reset Setting
Reactive/active ratio, which is calculated by the device, is reset in this
menu.
SAUE
If you want to leave the setup menu without making any other changes,
press the
“ESC” button until “SAVE SEt yES” shows on the screen. If
you want to save the changes, press the “SET” button. If not, press the
“ESC” button.
Using the “UP/DOWN” buttons, find “reactive/active ratio reset” menu(rAtE)
which is the second setting in the reset(rESEt) menu.
Press the “SET” button to enter the reactive/active ratio reset settings.
Using the
“UP/DOWN”
buttons, select
“yES”
to delete reactive/active ratio
or
“no”
to cancel the delete process and then press
“SET”
button.
Press the “SET” button for 3 sec. in order to enter to the menu.
3 sec.