Entes RG3-12C, Manual, Page: 10 / 41

POWER FACTOR CONTROLLER
RG3-12C/CS
9
3.5.b Switch-Off Delay Time Setting
Press the “SET” button to enter delay time settings menu(dELy).
The first setting in this menu is the switch on delay time setting(t-
on). Press the
“SET” button to change this time value.
Enter a value between 1-1800 seconds and then press “SET”
button. Using the “UP/DOWN” buttons, enter to another menu
option which you wish to change. If you are not going to change
any more settings, press the
“ESC” button.
SAUE
If you want to leave the setup menu without making any other
changes, press the
“ESC” button until “SAVE SEt yES” shows
on the screen. If you want to save the changes, press the “SET”
button. If not, press the “ESC” button.
Switch-off delay time must be set according to system requirement in
order to achieve compensation targets and also to provide long life time
for contactors and capacitors.
Using the “UP/DOWN” buttons, select the switch-off delay time
(dELy t-oF) menu.
Press the “SET” button to change this time value.
SAUE
If you want to leave the setup menu without making any other
changes, press the
“ESC” button until “SAVE SEt yES” shows
on the screen. If you want to save the changes, press the “SET”
button. If not, press the “ESC” button.
Enter a value between 1-1800 seconds and then press “SET”
button. Using the “UP/DOWN” buttons, enter to another menu
option which you wish to change. If you are not going to change
any more settings, press the
“ESC” button.