Enterasys Vertical Horizon VH-2402S2, Configuration Manual

Page: 68 / 116

60 VH-2402S2 User Interface VH-2402S2
IGMP Member Port Configuration
You can use the IGMP Member Port Configuration screen to assign ports
that are attached to hosts who want to receive a specific multicast service.
Figure 2-46. IGMP Member Port Configuration
Vertical Horizon Stack Local Management
IGMP Member Port Configuration
Unit Dynamic IGMP Member Port List Static IGMP Member Port List
---------------------------------------------------------------------
1
2 ------------------------- -------------------------
3 ------------------------- -------------------------
4 ------------------------- -------------------------
5 ------------------------- -------------------------
6 ------------------------- -------------------------
7 ------------------------- -------------------------
VID :
Multicast IP : Unit : 1 Port : 1
[Show] [More] [Add] [Delete]
<OK>
Use <TAB> or arrow keys to move. <Enter> to select
Parameter Description
Unit The stack unit ID.
Dynamic IGMP
Member Port List A list of the switch ports that have been automatically configured
as being attached to a IGMP host.
Static IGMP Member
Port List A list of the switch ports that have been manually configured as
being attached to a IGMP host.
VID The VLAN ID number used to sort the list.
Multicast IP The IP address for a specific multicast service that is used to sort
the list.
[Show] Displays settings for the specified VLAN ID and stack unit.
[More] Displays consecutively numbered stack units.
Unit/Port Specifies a stack port to be added or deleted from the static
member port list.
[Add] Adds a new host port to the current list.
[Delete] Removes a host port from the current list.