background image

48  VH-2402S2 User Interface

VH-2402S2

Port Assignment VLAN Configuration

Use this screen to configure port-specific settings for IEEE 802.1Q VLAN 

features. 

Figure 2-35.  Port Assignment VLAN Configuration

VLAN ID

The ID for a new VLAN to be created, or the ID of an existing 
VLAN to be displayed.

VLAN Name

The name of a new VLAN to be created, or the name of an 
existing VLAN to be displayed.

Status

Allows a configured VLAN to be enabled or disabled. To create a 
new VLAN specified in the VLAN ID and VLAN Name fields, 
select “Create” and then use <APPLY>.

Slected by

Selects VLAN to display by VLAN ID or VLAN Name.

[Show]

Displays settings for the specified VLAN.

                   Vertical Horizon Stack Local Management

                        Port Assigment VLAN Configuration

                   Unit  Port PVID  802.1Q Trunk  Ingress Filter
                 ------------------------------------------------
                    1      1   2         NO          FALSE
                    1      2   1         NO          FALSE
                    1      3   1         NO          FALSE
                    1      4   1         NO          FALSE
                    1      5   1         NO          FALSE
                    1      6   1         NO          FALSE
                    1      7   1         NO          FALSE
                    1      8   1         NO          FALSE
                    1      9   1         NO          FALSE
                    1     10   1         NO          FALSE

     Unit ID   : 1                    [Show]
     Port ID   : 1                    [More]

               <APPLY>               <OK>               <CANCEL>
          Use <TAB> or arrow keys to move, <Space> to scroll options.

Parameter

Description

PVID

The VLAN ID assigned to untagged frames received on this port. 
Use the PVID to assign ports to the same untagged VLAN.

802.1Q Trunk

Used to enable/disable the VLAN trunk status for the port. A 
VLAN Trunk link between two VLAN-aware switches will carry 
traffic from all VLANs, allowing VLAN tagged frames to maintain 
their VLAN ID across multiple switches. When enabled, a port 
joins all configured VLANs and the untagged port VLAN ID 
(PVID) is set to 4000, a reserved VLAN ID for trunk ports.

Ingress Filter*

If set to “True,” incoming frames for VLANs which do not include 
this port in their member set will be discarded at the inbound port.

[Show]

Displays settings for the specified stack unit and port.

[More]

Displays consecutively numbered stack units and ports.

* This control does not affect VLAN independent BPDU frames, such as GVRP or 
STP. However, it does affect VLAN dependent BPDU frames, such as GMRP.

Parameter

Description

Summary of Contents for Vertical Horizon VH-2402S2





















































































































Reviews: