Enterasys Vertical Horizon VH-2402S2, Configuration Manual

Page: 20 / 116

12 VH-2402S2 User Interface VH-2402S2
Displaying System Information
Use the System Information screen to display descriptive information
about the switch, or for quick system identification as shown in the
following figure and table.
Figure 2-4. System Information
Vertical Horizon Stack Local Management
System Information
System Description : Vertical Horizon Stack
System Object ID : 1.3.6.1.4.1.5624.2.1.46
System Up Time : 702567 (0 day 1 hr 57 min 5 sec)
System Name : DEFAULT SYSTEM NAME
System Contact : DEFAULT SYSTEM CONTACT
System Location : DEFAULT SYSTEM LOCATION
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
System Description System hardware description.
System Object ID MIB II object identifier for switch’s network management
subsystem.
System Up Time Length of time the current management agent has been
running. (Note that the first value is 1/100 seconds.)
System Name
*
Name assigned to the switch system.
System Contact
*
Contact person for the system.
System Location
* Specifies the area or location where the system resides.
*
Maximum string length is 255, but the screen only displays 45 characters. You
can use the arrow keys to browse the whole string.