Enterasys Vertical Horizon VH-2402S2, Configuration Manual

Page: 12 / 116

4 Management Overview VH-2402S2
Telnet Connection
After configuring the switch’s IP parameters, you can use a Telnet
connection to access the on-board configuration program from anywhere
within the attached network.
In-Band Network Connection
The on-board configuration program can be accessed using Telnet from
any computer attached to the network. The switch and stack can also be
managed by any computer using a Web browser (Internet Explorer 4.0 or
above, or Netscape Navigator 4.0 or above), or from a network c
omput
Use the Network Configuration menu to specify the
using network management software.
maximum number of simultaneous Telnet sessions that
are supported by the system.