VLAN Static Table Screen
WebView Local Management Tasks
3-39
Screen Element Descriptions
Refer to
Table 3-20
for a functional description of each screen element.
3.22 VLAN STATIC TABLE SCREEN
When to Use
To configure a static VLAN’s egress list, including which ports belong to the list, which ports can
transmit untagged frames, and which are forbidden ports.
How to Access
Click on
VLAN
on the WebView navigation frame. The VLAN Basic Information screen,
Figure 3-18
, displays. Click on
VLAN Static Table
on the content frame. The VLAN Static Table
screen,
Figure 3-21
, displays.
Table 3-20 VLAN Static List Screen Element Descriptions
Use this field or button…
To…
Current
See the ID number(s) for currently configured VLANs and
whether or not they are enabled or disabled.
VLAN ID (1-4094)
Enter a unique number (
1
to
4094
) for the new VLAN to be
created.
VLAN Name
Enter a name (1 to 32 characters) for the new or previously
created static VLAN.
Status
Enable
or
Disable
the static VLAN.
Add the new static VLAN to the list of those recognized by the
device.
Remove a selected entry from the device’s VLAN list. To select
an entry click on it in the
Current
field.
Remove all entries from the device’s VLAN list.
Summary of Contents for Matrix E1 1G582-09
