Enterasys Intrusion Prevention System Reporting Manual Download Page 78

Page: 78 / 122

Event Details

7-2 Enterasys IPS Analysis and Reporting Guide

The tabbed Event Details window displays with information about the event that you selected.

If you launch the Event Details window from Event Log, the Event Table pane, or Find Events, the
Event Details window has an upper pane with details about the event (see

Table 7-1

on page 7-3)

and three tabs:

•

Description — Includes a detailed description of the event. The

Reference(s)

hotlinks launch a

web browser to Google to search for that reference.

•

Signature Definition — Shows the signature of the event.

Summary of Contents for Intrusion Prevention System



























































































































Search results

Summary of Contents for Intrusion Prevention System

Reviews:

Related manuals for Intrusion Prevention System

Brands by name

Popular brands

Enterasys Intrusion Prevention System, Reporting Manual

Search results

Summary of Contents for Intrusion Prevention System

Reviews:

Related manuals for Intrusion Prevention System

Brands by name

Popular brands