manualshive.com logo in svg

Enterasys Intrusion Prevention System, Reporting Manual

Share
Download
Enterasys Intrusion Prevention System Reporting Manual Download Page 91

Legacy Reporting

Accessing the Legacy Reporting Tools

Enterasys IPS Analysis and Reporting Guide 11-3

Accessing the Legacy Reporting Tools

Use the following procedure to start using the legacy Dragon reporting tools:

1.

Enter either of the following URLs in your web browser:

https://

<

IP address

>:9443/

or

http://

<

IP address

>:8080/

where <

IP address

> is the IP address of the Reporting server. 

2.

When the Launch page displays, click on the

 Continue to Legacy Dragon Reporting (IPv4 

support only) 

link, as shown in the following figure. 

3.

When the login screen displays, enter your User Name and Password, then click 

login

. The 

user name and password entered must be those of a user with the DragonReporting role.

Main Window

The reporting tool interface is web-based and its appearance may vary slightly depending your 
browser. The Main window provides navigation areas and a display area as well the ability to 
select the desired reporting tool.

Summary of Contents for Intrusion Prevention System



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands