Enterasys Intrusion Prevention System, Reporting Manual, Page: 105 / 122

Legacy Reporting Using the Realtime Console
Enterasys IPS Analysis and Reporting Guide 11-17
6. Click Save Changes to modify the filter.
The Reset button clears all entered data.
Edit Filters
To edit filters:
1. Click Filter Management in the top left navigation area.
2. Select Filter Edit from the pulldown menu.
3. Select the desired filter from the Filters pulldown menu.
4. Click Execute .
The display area is populated with entry fields for the selected field.
5. Enter the desired information in the fields.
6. Click Save Changes to modify the filter.
The Reset button clears all entered data.
Delete Filters
To delete filters:
1. Click Filter Management in the top left navigation area.
2. Select Filter Delete from the pulldown menu.
3. Select the desired filter from the Filters pulldown menu.
4. Click Execute .
The display area is populated with a single statement asking if you want to delete the selected
filter.
5. Click the statement to delete the listed filter.
If you do not wish to delete the filter, you can click any option in the top left navigation area to
get out of the screen.
Load Events
You can select specific events to load which further isolate the shown data.
To load specific events:
1. Click Load Events in the top left navigation area.
2. Select the desired event from the pulldown menu.
3. Click Execute .
The display area is populated with information about the loaded events.
Note: The DefaultFilter refreshes the screen every minute.
Refresh mode is indicated by a red number in the upper right-hand corner of the screen in
parentheses. For example, (1) .
Note: The DefaultFilter refreshes the screen every minute.
Refresh mode is indicated by a red number in the upper right-hand corner of the screen in
parentheses. For example, (1) .