ENSONIQ EPS-16 PLUS, Musician'S Manual

Page: 70 / 260

Section 3 — Instruments and Banks
EPS-16 PLUS Musician's Manual
The next step is to make MIDI connections between all the modules and set their
system controls to receive MIDI. The diagram below illustrates the connections
and MIDI settings:
With the MIDI connection made and the parameters set properly, the final step is
to select the proper settings on the EDIT/Instrument page.
The chart below shows the settings that would be used to create the multi-timbral
split/layer combination in this example. Refer to the descriptions later in this
section for detailed information on each of the parameters.
Track 1 2 3 4 5 6 7 8 |
Goal
Transpose
Key Range
MIDI Out
Channel
MIDI Out
Program
MIDI Status
Play EPS
Sound
+0+00
C2-B3
N/A
N/A
LOCAL
Play EPS
Sound
+1+00
C2-C7
N/A
N/A
LOCAL
EPS+ I
MIDI Ch. 21
+0+00
C4-C7
2
042
BOTH
Play MIDI
Channel 5
+0+00
C4-C7
5
057
MIDI
Play MIDI
Channel 7
+0+00
C2-B3
7
097
MIDI
Play MIDI
Channel 8
-1+00
C2-C7
8
036
MIDI
OFF
N/A
N/A
N/A
N/A
OFF
OFF
N/A
N/A
N/A
N/A
OFF
Remember: You must have TRANSMIT ON=INST CHAN and MIDI IN MODE=POLY on
the EDIT/System•MIDI page in order for Smart Transmit to work. Also
remember to have the cables to any external MIDI devices connected to the
EPS-16 PLUS'S MIDI Out, not the MIDI Thru jack.
3 - 8
The MIDI Connection