ENSONIQ EPS-16 PLUS, Musician'S Manual

Page: 204 / 260

Section 9 — Sequencer Edit Functions EPS-16 PLUS Musician's Manual
This command allows a sequence to be attached (appended) to the end of another
sequence. You also can append a sequence to itself to make a longer sequence.
For example, if you have a drum sequence that is four bars long, you could
append it to itself to create an eight-bar sequence. Do it again and you have a
sixteen bar sequence. The sequence to be appended must have the same time
signature as the selected sequence.
• Select APPEND SEQUENCE.
• Press Enter•Yes. The display reads FROM SEQ=SEQUENCE ##. This is
the source sequence.
• Press Enter•Yes. The display reads TO SEQ=SEQUENCE ##. This is the
destination sequence.
• Press Enter•Yes to complete the command (or Cancel•No to abort the
procedure).
Use this command to add bars to or delete bars from a sequence.
• Select CHANGE SEQUENCE LENGTH.
• Press Enter•Yes. The display reads ADD ## BARS AT ##.
If, for example, you wanted to add 2 bars to your sequence starting at bar 4,
adjust the display to look like this: ADD 2 BARS AT 4.
• Press Enter•Yes to complete the command (or Cancel•No to abort the
procedure).
• Or, you can underline ADD in the display and use the Up Arrow button to
change it to DELETE You can now delete specific bars from the sequence
using the above procedure.
• Press Enter•Yes to complete the command (or Cancel•No to abort the
procedure).
9 - 4
COMMAND/Seq•Song Page