ENSONIQ EPS-16 PLUS, Musician'S Manual

Page: 187 / 260

EPS-16 PLUS Musician's Manual Section 8 — Sequencer Basics
EDIT/Track Page
These parameters control the track functions used when sequencing.
The track status parameter allows you to control the playback status of each track
within the selected song or sequence. The Cursor (underline) tells you which
track is selected. To select a different track, press its Instrument•Track
button. The underline will move to the new track.
You can select any of the tracks which contain recorded data and use the
Up/Down Arrow buttons to select PLAY, SOLO, or MUTE status for each.
The display shows the status of each track:
• "P" means PLAY - Tracks which show a "P" will play normally.
• "S" means SOLO - Selecting "S" for any Track will "solo" the track
muting all the others.
• "M" means MUTE - Selecting "M" for a track will silence that track.
• A "Star" indicates that nothing has yet been recorded on the track
- no track data. In the illustration, Tracks 5,6,7, and 8 have not yet
been recorded.
When the song is selected, if you go to the EDIT/Track page you will find a third
screen has been added — it looks just like the track status screen for a sequence
except it says SNG instead of SEQ in the left corner of the display. This shows
you the status of the song tracks. You can select P (play), M (mute), or S (solo)
for any of the song tracks just as would sequence tracks. Note, however, that
changing the mix or pan of a song track will also affect any corresponding
sequence tracks.
EDIT/Track Page
8 - 11