System Overview–6
EXPRESS PANEL CONTROLS OVERVIEW
The Express Control Panel is divided into two main control areas: the Channel controls
and the Configuration controls.
Channel Controls
The Channel controls on the Express Panel are shown in the figure below. The 10 Channel
Select pushbuttons, the Video and Audio pushbuttons, and the read-out display on the left
side of the panel are the main Channel controls.
A Channel is defined as a set of video and audio processing control parameters from any
Avenue module connected to the Express Panel. The video and audio can be from different
modules if desired. Video and audio parameters are configured to a Channel Select
pushbutton with the Configuration controls as described in detail later in the Channel
Configuration section of this data pack. When a configured Channel is recalled by
selecting a Channel Select pushbutton, each proc amp parameter or audio level can be
changed using the four knobs under the display.
Channel Control Overview on Express Panel
Channel Select
pushbuttons
Audio
pushbutton for
saving/recalling audio
parameters assigned to
highlighted
Channel
Select
pushbutton.
Parameter display
window.
Parameter control knobs
for adjusting Video and
Audio proc controls
assigned to highlighted
Channel Select
Video
pushbutton for
saving/recalling video
parameters assigned to
highlighted
Channel
Select
pushbutton.
Avenue Express Control Panel