Avenue Express Control Panel
Channel Select Operation
To use the
Channel Select
pushbuttons to recall Video proc amp and Audio levels, refer
to the instructions below.
1. With the Config Select pushbutton turned off, select a
Channel Select
pushbut-
ton. If this pushbutton has been configured, it will illuminate green. The
Configuration display will show what module has been assigned to the Video and
Audio pushbuttons for this channel and the video or audio parameters will appear
in the Parameter window on the left of the panel.
2. Select the
Video
or
Audio
pushbutton and use the four knobs to adjust the desired
parameters for this channel.
3. You may return any of the four video or audio parameters to the module defaults
by selecting the
CLR
pushbutton then pushing in the knob corresponding to the
parameter you wish to reset.
Express Panel–1
8