While in a Frame menu, move the carat to a module present in the frame and enter the
module to set the following module parameters with the Express Panel. Slots with no
module with be indicated as
- empty -
.Refer to the Module Menu Tree on the next page.
Module Control and Configuration
To access the available modules in each frame on the Avenue network, follow the steps
below.
1. The first module configuration menu to come up in the Configuration display will
be
j
Module Config
. Below this will be a list of available modules in the frame.
2. Enter the
j
Module Config
menu by selecting the
Right Arrow
pushbutton or
push in the
Configuration
knob.
3. The first selection is
View Status
. Move the indicator carat to
View Status
and
enter the menu for a list of read-only module status items as shown in the menu
tree on the next page.
To view each Status item, move the carat to the item and enter the menu. Exit
back to the last menu and move the carat to the next item.
4. You may edit the Module Name and the Module Group if desired. To edit either of
these parameters move the indicator carat to the desired function and select Enter
by using the
Right Arrow
pushbutton or pushing in the
Configuration
knob.
Edit the Module Name or Group by moving the carat to each letter or number and
rotating the Configuration knob to the desired letter or number.
5. The last selection in the
j
Module Config
menu,
Module Lock
, is not active at
this time.
6. The next items in the Module menu are the available menus for the selected
module. All of the menus available for the selected module are listed. Enter each
menu and adjust parameters if active. Some parameters may not be available for
adjustment. Refer to the specific module data pack for a list of all module menus
and parameters. These menus are different for every Avenue module.
Avenue Express Control Panel
Express Panel–16