Frame and Module Control and Configuration
Now that the Express Panel is set up in the Avenue network and configured for use in
your environment, you can access frames on the network and individual modules in each
frame and use the panel for the controls described in this section.
Frame Control and Configuration
To access the available frames on the Avenue network, follow the steps below.
1. Enter the Configuration mode by selecting the
Select Config
pushbutton. It will
illuminate red to indicate you are now in Configuration mode.
2. The first configuration menu to come up in the Configuration display will be the
Choose Frame by Knob
. The list of available frames will be shown as illustrated
in the Frame Configuration tree on the following page.
3. Use the Configuration knob to move the indicator carat to a frame and enter the
frame menu by selecting the
Right Arrow
pushbutton or push in the
Configuration
knob.
4. The first selection is
j
Frame Info
. Enter this menu and move the indicator carat
to View Status and enter the menu for a list of read-only frame status items and
configurable parameters such as IP Address as shown in the menu tree on the next
page.
To view each Status item, move the carat to the item and enter the menu. Exit
back to the last menu and move the carat to the next item.
5. You may edit the Frame Name and the Frame Group if desired. To edit either of
these parameters move the indicator carat to the desired function and select Enter
by using the
Right Arrow
pushbutton or pushing in the
Configuration
knob.
Edit the Frame Name or Group by moving the carat to each letter or number and
rotating the Configuration knob to the desired letter or number.
Avenue Express Control Panel
Express Panel–14