Express Panel System Parameters Configuration
The next step in Express Panel configuration is to configure the System parameters for
the panel. This includes LED brightness, LCD contrast and other panel characteristics.
Read-only status information and System Reset controls are also available from this
menu.
Continue the configuration by moving the indicator carat to the System selection and
enter this menu. Use the instructions below and refer to the graphical representation of
the System menu tree given on the following page.
1. The
System
menu will have the following parameters that can be set for this
panel to determine panel characteristics as follows:
• LED Brightness
• LCD Contrast
• Software Version
• Reset EEProm
• System Reset
• Panel Test
2. Use the Configuration knob to move the indicator carat to each of the selections,
then enter each selection by selecting the
Right Arrow
pushbutton or push in the
Configuration
knob.
3. For panel system parameters requiring a value such as LED Brightness and LCD
Contrast, use the Configuration knob to scroll through the values to reach the
value desired.
4. The Software Version is a read-only field describing the software version running
on this panel.
5. The Reset EEProm and Reset System are activated by pushing in the
Configuration knob.
6. A Panel Test is included which will report the name of the control as you activate
it. Each knob, pushbutton and LED can be tested and will be reported on the
display. The following panel controls will be reported when activated:
• Left and Right arrow pushbuttons
• Knobs 1-4 and Knob 5 (Configuration)
• Clear, Save, and User pushbuttons
• Channel pushbuttons 1-10
Avenue Express Control Panel
Express Panel–12
