Code: I.H4.V10.3003
Installation and Maintenance Manual
Version: 07
26 / 66
Ennera Energy and Mobility, S.L.
This document contains confidential information which is property of Ennera Energy and Mobility, S.L. The copy, transmission or use by other people, of the whole document or
part of its contents, is not allowed without written permission from Ennera Energy and Mobility S.L.
5.7.5.
Tail
1.
Turn around the generator to put it
facing down. For this:
•
Lift up the tower in order to rotate
the generator to the position.
Ensure that the blades do
not hit the ground during
the process. Hold the
generator while doing this
process.
•
Rotate the generator smoothly and
leave the assembly as shown in the
figure.
2.
Place the tail (W5) in position and
attach it to the generator with 6
countersunk M8x40 screws.
5.8.
Electrical connections
5.8.1.
Converter set
1.
With the converter horizontal,
thread the 6 M8x10 allen screws in the
converter sides (not until the end).
2.
Assembly the converter structure
(W14) on the converter (W4) by placing
the screw heads into the structure
holes.
The structure must be
located as shown in the
picture (flanges facing
back).
W5
W4
W14
