www.enlogic.com
34
4. Select Open.
5. Enter your Username. Press Enter.
6. Enter your password. Press Enter.
7. You are now logged into the Telnet or SSH. Refer to the CLI Commands table below for available commands.
Note: Telnet/SSH connection is not available when serial connection is enabled.
CLI Commands and Prompts
CLI Options
To display a list of available options in the CLI, enter ‘?’. This will display the 4 main categories of command options
available: sys, net, usr, dev.
ENLOGIC>?
sys
PDU system configure and setting
net
PDU net application configure and setting
usr
PDU user operation
dev
PDU device setting
To display a list of options available for one of the menus (either sys, net, usr, or dev), enter the menu command
and press enter. (Note: You can also enter the menu command with ‘?’ to show a list of commands.) For example,
to see the system options available:
ENLOGIC>sys?
sys: local system setting
usage:
sys [date/time/ntp] [2012-09-11/14:16:20/121.100.61.4]
sys [ver/def/rst]
sys upd [lan/ser]
sys conf
sys log del [event/data]