SETTING UP YOUR EBIKE 6
BILLY EBIKE USER MANUAL
Adjust the display position so that it can be easily
viewed when sitting on the bike, then finally secure the
handlebar by tightening the two pinch bolts using a
5mm allen wrench.
Standing toward the ‘tire’ side of the folded ebike, place
an anchoring foot behind the tire and raise the bike so
that the bike is no longer resting on the crank guard.
Slowly swing the handlebar half of the bike outwards in
a motion that closes the center hinge.
D. UNFOLD THE EBIKE
Clasping the clamp lever handle, draw it closed by
swinging it across the frame break so that there is an
even gap between the lever handle and the front half of
the frame. It is designed to sit very close to the frame,
but not actually touch it.
Rotate the lock clasp clockwise so that the locking tab
sits inside the hole of the clamp lever handle and the
lock clasp sits flush against the handle.
DO NOT RIDE THE EBIKE UNLESS
THE FRAME IS FULLY UNFOLDED AND
BOTH THE CLAMP LEVER AND LOCK
CLASP ARE SECURED. SEVERE CON-
SQUENCES WILL RESULT.