SETTING UP YOUR EBIKE 12
BILLY EBIKE USER MANUAL
As you turn it anti clockwise, it will progressively allow
more spring.
When the dash (-) icon faces closest to the frame, the
suspension forks are in full suspension mode.
ADJUSTING SUSPENSION PRELOAD
It is also possible to adjust the amount of preload on
the air suspension.
Remove the “Air” cap by turning in an anti-clockwise
direction and inflate using a high-pressure air suspen-
sion pump. Recommended starting pressures are listed
below based on rider weight.
ADJUSTING SUSPENSION DAMPING
At the bottom of the fork leg you will find a rebound
damping dial. This determines the rate of return when
the suspension is compressed.
Turning it completely clockwise will set a slow rate
of return. Check this by holding the front brake and
pumping the fork up and down. Turning it completely
anti-clockwise produces a faster rate of return. Setting
a faster rate of return is more ideal for bumpy terrain,
where the suspension needs to return to full length
quickly in between bumps. Setting a slower rate of re-
turn might be better for smoother terrain, where bumps
are a further distance apart. You can make small adjust-
ments until the setting is right for you.
Your Billy ebike comes equipped with a pre-load adjust-
able rear coil suspension to help absorb bumps during
your ride.
To adjust, locate the textured threaded stopper that sits
at the end of the suspension spring, towards the top of
the rear suspension unit.
9. REAR SUSPENSION
DO NOT FORCE THE DIAL HARD IN
EITHER DIRECTION. DOING SO MAY
DAMAGE THE FORKS AND RESULT IN
SERIOUS INJURY.
ONLY ATTEMPT TO ADJUST FORK
PRELOAD/SAG IF YOU ARE EXPERI-
ENCED WITH SUSPENSION TUNING.
OTHERWISE, PLEASE CONSULT A
QUALIFIED BICYCLE MECHANIC.
WHILE SUSPENSION IS DESIGNED TO
HELP ABSORB SHOCKS, IT DOES NOT
GUARANTEE YOUR SAFETY WHILE
RIDING. EXERCISE EXTREME CARE TO
AVOID THE RISK OF INJURY.
