SETTING UP YOUR EBIKE 14
BILLY EBIKE USER MANUAL
Ensure that the ebike’s power button is switched to the
off position (0).
Before powering on the charger, insert the charger ca-
ble into the charging port towards the top right of the
battery port. Once attached securely, switch your char-
ger on.
While charging, the charger’s red light will illuminate.
Once charging is complete, the charger will indicate so
by illuminating the green light.
Lithium batteries and electricity can cause serious injury
when incorrectly maintained or handled or used inap-
propriately, dropped, or exposed to water.
To charge the battery away from the ebike, fold the bike
in half and use the supplied key to unlock the battery
from its mounted position.
Slide the battery out completely and charge in a cool
dry location until fully charged.
Your new Billy ebike comes equipped with a display and
3 button keypad to allow you to operate and customize
your ebike riding experience, as well as navigate through
trip and system information. References to these buttons
will be made as Up, Down and Mode.
To power on the ebike, hold down the Mode button for a
few seconds until the display turns on.
Similarly, to power off the ebike, hold down the Mode
button for a few seconds until the display turns off.
12. DISPLAY
WE URGE YOU TO EXERCISE EX-
TREME CARE WHEN USING YOUR
EBIKE’S BATTERY AND ELECTRICITY
RELATED COMPONENTS AND DEVIC-
ES TO MINIMIZE THE RISK OF SERI-
IF YOU NOTICE SOMETHING UNUSU-
AL DURING THE CHARGING PRO-
CESS, TURN THE POWER OFF IM-
MEDIATELY AND CONTACT US FOR
ASSISTANCE TO AVOID POSSIBLE IN-
Mode
Down
Up
