SETTING UP YOUR EBIKE 15
BILLY EBIKE USER MANUAL
When powered on, pressing the Mode button will cycle
through the various speed interfaces of real time speed,
average speed and maximum speed.
Pressing the Down button for 3 seconds activates the
“Walk mode”, where the ebike will travel at a constant
speed of 6km/h.
Pressing the Up button for a few seconds illuminates
the display for viewing ease when lighting conditions
are low. Once illuminated, pressing Up again for a few
seconds returns the display to the standard non-illumi-
nated view.
When fully charged, the energy bar across the top right
of the display will show bars spanning the width of the
display.
When the energy bar is at extremely low levels, it will
only show four bars and begin flashing until the motor
and display shut off altogether.
Pressing the Mode button also cycles through the vari-
ous trip and odometer readings of the display.
Pressing both Up and Down simultaneously enters the
system setup menu.
The first setup option allows you to switch between im-
perial (miles) and metric (kilometres) forms of measure-
ment by pressing Up or Down. Confirm your selection
by pressing Mode and return to the setup menu.
t
The next setup menu option allows you to set the maxi-
mum speed in terms of kilometres per hour. Use the Up
and Down buttons to customize your maximum speed.
WE SHALL NOT BE HELD RESPONSIBLE FOR IN-
APPROPRIATE OR ILLEGAL BEHAVIOUR WITH RE-
GARD TO MAXIMUM SPEEDS AS DICTATED BY
YOUR LOCAL BIKE LAWS.
Exit the setup menu by holding the Mode button for at
least 2 seconds.
DO NOT RIDE THE EBIKE WHEN WALK
MODE IS ACTIVATED. IT IS ONLY DE-
SIGNED TO ASSIST PUSHING.
YOU MUST BE AWARE OF YOUR LO-
CAL EBIKE LAWS AND RIDE WITHIN
THE ALLOWABLE PUBLIC ROAD LE-
GAL LIMITS UNLESS YOU ARE RIDING
ON PRIVATE OFF ROAD LAND.