SETTING UP YOUR EBIKE 10
BILLY EBIKE USER MANUAL
Rotate the lock clasp anti-clockwise so that the locking
tab that sits inside the hole of the clamp lever handle no
longer secures the clamp lever handle in place.
Swing the clamp lever handle outwards to release the
clamp.
4. FOLDING
With an anchoring foot behind the rear wheel to stop it
from rolling backward as you fold, use one hand to hold
the frame close to the seat post and the other hand to
hold the front half of the bike. Fold the bike in half using
a swinging motion, until the front wheel aligns with the
rear wheel. Allow the bike to rest on the lower guard for
storage with a smaller footprint.
Ensure the motor cable is securely connected to the
controller connector cable.
If disconnected, simply line up the arrow on the mo-
tor cable with that on the connector cable, and press
together carefully. Notice that one side has a ‘female’
connection with holes and other a ‘male’ connection
with pins. The connection is made such that the pins fit
exactly into the holes on the other side.
If there is resistance do not force the two together, as
this may bend pins out of place and destroy your con-
nection. Simply put apart gently, then try again by align-
ing the arrow guides together and pushing carefully.
5. REAR HUB MOTOR
Your Billy ebike comes equipped with front and rear
mechanical disc brakes, designed to help you slow
down and stop as required.
6. BRAKES
DO NOT RIDE THE EBIKE WITH-
OUT THE MOTOR CABLES PROPER-
LY CONNECTED. DOING SO COULD
DAMAGE COMPONENTS AND RESULT
IN SERIOUS INJURY.
KEEP IN MIND THAT WHILE YOUR
BIKE’S BRAKES ARE STRONG, WE
HOLD NO RESPONSIBILITY
IN THE EVENT OF FAILURE.