background image

begins to flash. At the same time, hold the steam lock button (3.) or the steam trigger (4.) down to 
activate the automatic cleaning function.

Note:

The steam trigger (4.) and the steam lock button (3.) cannot be held down at the same time. 
Automatic cleaning lasts for around 1 minute, after which the light (12.) will switch off. Finally, 
press the steam trigger (4.) to stop the release of steam.

3. As automatic (or manual) cleaning only lasts around 1 minute, the user can also hold the iron - 
taking care to avoid burns - directly over a suitable container positioned below the sole plate.

         

Warning!

While the product is undergoing automatic (or manual) cleaning, the user must position the iron in 
a safe area, due to the large quantity of water which is issued from the steam holes on the bottom 
of the iron.
At this stage, droplets of hot water will fall from the plate of the iron; therefore, take care to avoid 
burns.

Note:

During the automatic cleaning process, the on/off switch (13.) must be held down for around 7 
seconds in order to automatically exit the programme.

CLEANING THE APPLIANCE

Warning!

Do not use abrasive agents to clean the plate. Try to keep the surface of the plate smooth: avoid 
contact with metal objects.

Warning!

Do not immerse the appliance in water or other liquids.

Warning!

Regularly check the condition of the iron’s power cord before using it. If it is damaged, contact your 
nearest support centre to have it replaced, which must only be done by specialist personnel.

Clean the appliance with a slightly damp, non-abrasive cloth, water, and a few drops of a 
non-aggressive cleaning product. Dry it thoroughly with a soft cloth. To extend the iron’s lifespan, we 
recommend carrying out this procedure on a regular basis (once or twice per month).
Fill the tank with approximately 100ml water. Do not add vinegar, descaling products or other
additives to the tank.
Plug the appliance into the electrical socket. Turn the thermostat dial to “MIN”. Position the iron 
horizontally on the ironing board and press the steam trigger (4.). Slowly move the iron backwards 
and forwards for 1 minute.
Remove the plug from the electric socket.
If necessary, clean the iron with a soft, slightly damp cloth.

Note:

Before using the iron again, test it out on an old piece of cloth to make sure that the plate and the 
tank are clean and to allow any residual water to evaporate.

Before proceeding to clean the iron, make sure that it has been plugged out and has cooled down 
completely.

TECHNICAL DATA

Voltage: 230V~
Power: 2200W
Frequency: 50-60 Hz 
Protection class: I

WARRANTY

DISPOSAL

The appliance is guaranteed for a period of three years from the date of purchase.
The date on the receipt / invoice is the warranty start date. In cases of pre-existing defects, the 
appliance will be replaced. The warranty does not cover parts rendered defective by negligence or 
carelessness.
Moreover, the warranty does not cover improper or professional use of the appliance. The seller shall 
not be liable for any damage that may result directly or indirectly to persons, property and pets as a 
result of non-compliance with any of the indications given in the owner’s manual.

The crossed-out dustbin symbol appearing on the appliance indicates that, at the end of its life, the 
product must be treated separately from household waste, and delivered to a separate waste 
collection facility for electric and electronic equipment or returned to the retailer when purchasing a 
new, equivalent appliance. The correct separation of waste and the subsequent delivery of the 
appliance for recycling, treatment and environmentally compatible disposal help to safeguard health 
and the environment; and promote the reuse and/or recycling of materials contained in the 
appliance. The user is responsible for delivering the appliance to the appropriate collection facilities 
at the end of its life. For more detailed information on available collection systems, contact your local 
waste disposal service or the shop where you purchased the product. Dumping or inadequately 
disposing of this appliance, or failure to return it to a separate collection centre for electrical and 

electronic waste, is punishable with the administrative sanctions and fines imposed by current law 

regarding waste disposal.

13

14

Summary of Contents for 160130.01



































Reviews: