ENHANCED VISION Merlin LCD Plus, User Manual

Page: 44 / 56

1. Merlin Plus Does Not Turn ON
• Make sure the power supply is the proper one for Merlin Plus, 12V output,
3A minimum.
• Make sure the power supply cord is completely plugged into the outlet.
• Make sure the two parts of the power supply cord are securely connected.
• Make sure the power supply cord is completely plugged into the DC 12V
IN jack in the back of Merlin Plus.
• Check the power strip/surge protector’s ON/OFF switch and circuit breaker
if Merlin Plus is plugged into one.
• Push the POWER button on Merlin Plus’ control panel. A green light next
to the POWER button should turn ON, indicating the power is ON
(see page 14).
2. The VGA Monitor Does Not Turn ON
• Make sure the VGA monitor power cord is completely plugged into the AC
outlet.
• Check the power strip/surge connector if the monitor is plugged into one.
• Check that Merlin Plus is ON, a green light should be lit next to the control
panel POWER button. If not check FAQ 1.
• Check that the VGA monitor cable is properly secured into the port labeled
MONITOR in the back of Merlin Plus (see page 10).
3. The 20“ TV Monitor Does Not Turn ON
• Make sure the power cord is completely plugged into the outlet.
• Check the power strip/surge protector if the monitor is plugged into one.
• Press the power button on the lower right corner on the front of the
monitor. A picture should appear within a few moments (see page 11).
4. Merlin Plus Does Not Display any Picture on the 20” TV Monitor
• Check that Merlin Plus is ON. If not, check FAQ 1.
44
Troubleshooting