ENHANCED VISION Merlin LCD Plus, User Manual

Page: 11 / 56

b. With a 20” Enhanced Vision TV Monitor
1. Find a steady and level location, such as a
table or desk, where you will be comfortable
using Merlin Plus.
2. Carry Merlin Plus only by the two recessed
handles on the sides of the base for a secure
grip (see figure 1). Place it on the table or
desk. Place the TV monitor on the platform.
3. Use the S-VIDEO cable (item 17 on page 7)
to connect the TV-monitor to Merlin Plus.
Connect one end to the jack on the back of
the upper platform, and the other to the
S- VIDEO jack on the back of the monitor
(see figure 2).
4. Plug the power supply cord (item 11 on
page 7)into the outlet and the other end into
the DC IN 12V jack on the back of
Merlin Plus’ base (see figure 3).
5. Plug the TV monitor’s power cord into the
outlet.
Note: You may use the RCA yellow jack
labeled “VIDEO OUT” on the back of Merlin
Plus to connect a secondary TV monitor. Please
be aware that this monitor will have
functionality limited to Merlin Plus control
panel viewing modes only (see page 19). For
more information, refer to TV Monitor Features
Available section on page 42.
11
Setting Up Merlin Plus
figure 1
figure 2
figure 3