EnGenius EP801 Page 8 User Manual Download

Page: 8 / 29

~15~

a. Allow changing the Base PIN which requires to enter in Base

Settings (

-6).

Re: Default is “0000”.

24. DTMF Duration

a. From

-6-1 to select variable duration of DTMF tone.

b. Default is 100ms.

c. When entering the base setting, PIN is required. Default is “0000”.

Re: Better to check with your phone company first before changing it.

25. Programmable Flash key timing

a. From

-6-2 to select flash key timing

b. 9-level (100 ms - 900 ms) timing selections, default= 600 ms.

c. The default value (600 ms) works in most areas. Changing this

setting may cause Flash key not working. Change only when you
are certain of the new value would work.

d. When entering the base setting, PIN is required. Default is “0000”.

26. Assign next handset ID for new handset

a. Using registered handset from

-6-3 to assign a next handset

ID to a new handset.

b. If not assign next handset ID, the system will automatically assign a

handset ID to a new handset..

c. When entering the base setting, PIN is required. Default is “0000”.

27. Clear Handset

a. Using registered handset from

-6-4 to remove the other

registered handset, in case the other registered handset is defected.

b. Once clear the other registered handset, the user is able to register a

new handset for instead.

c. When entering the base setting, PIN is required. Default is “0000”.

28. Change PIN

Allow changing the base PIN which requires to enter the “Base Settings”
(

-6-5).

a. Using registered handset to change PIN from

-6-5.

b. Default PIN is “0000”.

c. When entering the base setting, PIN is required. Default is “0000”.

29. Auto Hang Up feature

a. Using registered handset from

-6-6 to turn on/off the Auto

hand up feature.

b. If turning on the feature, the handset will automatically hang up the

~16~

call when the far-end hangs up the call.

c. When entering the base setting, PIN is required. Default is “0000”.

30. Area Code

The area code function allows calls within local and country area codes
to be dialed without the prefix.

a. Enter

-4-6-1 to set the “Local” area code.

b. Enter

-4-6-2 to set the “Country” area code.

Re: Up to 3 digits can be entered.

31. Multiple Base setting

a. Up to 4 bases can be set in one system.

32. Set Time

The set time function allows user to set date/time to support the DTMF
caller ID (DTMF caller ID doesn’t attach date/time when receiving from
PSTN, using this setting, user is able to review the date/time when the
caller ID received).

a. Enter

-6 to set Base Settings.

b. Press

scrolling key to select desired base.

c. Enter Base PIN (Default is “0000”).

d. Enter “7” to enter Set Time.

e. Enter 4 digits for MM/DD(Month/Day), then enter 4 digits for hr:mm

(Hour

：

Minute

)

Press

SAVE

(left soft key) to finish the setting.

Summary of Contents for EP801






























Search results

Summary of Contents for EP801

Reviews:

Related manuals for EP801

Brands by name

Popular brands

EnGenius EP801, User Manual

Search results

Summary of Contents for EP801

Reviews:

Related manuals for EP801

Brands by name

Popular brands