~7~
Regulatory Information
EP801
This device complies with CE Rules. Operation is subject to the following
two conditions:
1) this device may not cause harmful interference, and
2)
this device must accept any interference received, including
interference that may cause undesired operation.
1.
This telephone system complies with rules of the EN 301 357-2 (RF
)
、
EN 301 489
(EMC
)
、
EN 60950 (Safety) and EN 50371 (RF safety).
2.
The REN is useful to determine the quantity of devices you may connect to your telephone
line and still have all devices ring when your telephone number is called. In most, but not
all, areas the sum of the REN’s of all devices connected to one line should not exceed 5.0.
To be certain of the number of devices you may connect to your phone line, you should
contact you local telephone company for the maximum REN in your area.
3.
If your telephone equipment causes problems to the telephone network, the telephone
company may ask you to disconnect your phone system from the line until the problem has
been corrected. Consult with your local phone company for your rights if this happens.
4.
Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the proper functioning of your telephone system. Consult with
your local phone company for your rights if this happens.
5.
This telephone system may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs.
6.
This telephone system has been tested and found to comply with the limits for rules of the
EN 301 357-2 (RF
)
、
EN 301 489 (EMC
)
、
EN 60950 (Safety) and EN 50371 (RF safety).
These limits are designed to provide reasonable protection against harmful interference in a
general public installation. Operations of these devices may still encounter interference
from/to nearby TV’s, VCR’s, radios, computers, or other electronic devices. To minimize or
prevent such interference, the telephone system should not be placed or operated near
other electronic devices.
7.
However, there is no guarantee that interference will not occur in a particular installation. If
this telephone system does cause interference to other electronic devices, which can be
determined by turning the system off and on, the user is encouraged to try to correct the
interference by one or several of the following measures:
a.
We recommend at least 20 feet between the system and other electronic devices.
b.
Connect the base station to a power outlet on a circuit separate from that used by the
device experiencing interference. Consult the dealer or an experienced electronic
technician for help.
~8~
Equipment Checklist
1. In a Base + Handset package, please find the following components:
a. Base Station x 1
b. Base Antenna x 1
c. Base AC/DC Adaptor x 1
d. Handset x 1
e. Handset Antenna x 2 (Short × 1, Long ×1)
f.
1100mA Li-ion Battery Pack x 1
g. Telephone Cord x 1
h. CD (User’s Manual), Quick Guide
2. In a Handset package, please find the following components:
a. Handset x 1
b. Handset Antenna x 2 (Short × 1, Long ×1)
c. 1100mA Li-ion Battery Pack x 1
d. Desktop Charger x 1
e. Charger AC/DC Adaptor x 1
f.
Quick Guide
3. Optional Accessory
a. Outdoor Antenna Kit (including antenna and cable)
b. Lightning Protection Kit
c. Spare Battery x 1700mA Li-ion
d
.
High-gain handset antenna
e. Headset
f.
Antenna Splitter
