~47~
Re
：
The base ID for 1
st
base is “10”, for 2
nd
base is
“20”, for 3
rd
base is “30”, for 4
th
base is “40”.
Notes:
1. When initial setting the “Multi-Base”, you have to select the BS #1
first, then followed the above steps to select 2
nd
, 3
rd
or 4
th
base.
2. For synchronization mechanism, all handsets must be register again
before start using multi-base scenario. i.e. the initial handset ID with
1x must register to BS1, and the rest handsets must be registered to
2
nd
, 3
rd
or 4
th
base respectively.
3. After all above processes, the “Multi-Base” is complete then.
Call Manager
“Call Manager” feature allows two options
：
1.One is the handset to be set to receive incoming calls or make outgoing
calls (2-way intercom, broadcast and transferred call are allowed). The
option is selectable by base 1 to base 4.
2.The other option is the handset to be set to access to available bases
automatically or manually.
For 1
st
option (Subscribe BS)
：
1. Press
MENU
, followed by “4” to enter the Call
Settings mode.
Press “5” to select Call Manager.
2. Press “1” to set Subscribe BS.
Re
：
When entering the submenu of Subscribe BS,
the LCD will show the available bases which
already subscribed.
Call Manager
1.Subscribe BS
SELECT
BACK
3. Press
or
key to select the desired base (#1~4), press
CHANGE
(Left) soft key to set the Subscribe BS ON/OFF.
4. If set the Ssubscribe BS ON, that means the handset is able to access
the line of the desired base, so the handset is able to make outgoing call
or answer incoming call via the desired base.
On the contrary, if set the Ssubscribe BS OFF, then the handset can’t
access the line of the desired base, so the handset isn’t able to make
outgoing call or answer incoming call via the desired base.
~48~
For 2
nd
option (BS Selection)
：
1. Press
MENU
, followed by “4” to enter the Call
Settings mode.
Press “5” to select Call Manager.
2. Press “2” to set BS Selection.
Re
：
Default setting is “OFF”.
Call Manager
2.BS Selection
SELECT
BACK
3. Press
CHANGE
(Left) soft key to set the BS Selection ON/OFF.
Re
：
If BS Selection set
“
ON
”
, when pressing
or
key, the LCD will show the available bases
(Lines), i.e. 1, 2, 3, 4. Press digit “1”, you can access
to base 1 to get the line.
Visual Message Waiting Indicator (VMWI)
VMWI feature supported the FSK message which received from telephone
line; It will activate a message icon of handset and flash the broadcast LED
of base.
Notes:
1. A subscription to telephone company voice mail service is required.
2. If the handset still indicates the icon even after you have listened all messages,
turn it off by pressing and holding “Caller ID” key on the handset.
