EnGenius EP801, User Manual

Page: 21 / 29

~41~
b. Press OPTION (Right) soft key to enter editing
menu.
c. Press “1” to erase the desinated phone entry.
d. LCD shown “Delete entry?” Press YES (Left) soft
key to confirm your change.
8. To edit phonebook:
a. Use or scrolling key or the alphabetical
search method to locate the record to be erased or
edited.
b. Press OPTION (Right) soft key to enter editing
menu.
c. Press “2” to edit the desinated phone entry.
9. Dial from display:
a. Press
or to dial the phone number or Handset ID
displayed.
Call barring
1. Block the users from dialing the long distance calls or international calls.
You need the password to enter the setting. The default PW is “0000”.
2. Press MENU -4-3 to enter Call Barring. Enter the
password, followed by OK (Left) soft key
3. Use or scrolling key to switch between On
and Off of this setting. Press SELECT to confirm your
selection.
Re
：
The default of Call barring is “Off”.
Call Barring
off
SELECT BACK
4. To add the Call barring code
~42~
a. Once turn on the call barring feature, you can key
in the “call barring” code.
Press
ADD (Left) soft key then start entering the
call barring code After the number entered, press
SAVE (Left) soft key to save it.
(1) Up to 5 digits can be edit to be call barring code. For
example, if you want to block all call dialing to
Manhanttan, NY area, you can enter 1212 as the call
barring code.
(2) If you base station is adjuct to a PBX system, please
also include that specific number to retrieve the
PSTN tone.
b. Press OPTION to delete or edit the call barring
codes.
c. Up to 5 set of call barring codes can be
programmed.
d. If wants to block all outgoing calls, enter “
＊＊＊＊
＊
”, press SAVE (Left) soft key to save it, all
outgoing calls will be restricted.
Programmable Feature Call
1. If EP801 base unit is installed behind a PBX system, it is feasible to pre-
program some feature call along with the PBX’s feature code into the
system.
2. Up to 10 most frequently used feature call codes can be pre-
programmed.
3. Name and enter feature call codes:
a. Press MENU (Right) soft key while the handset is
in the standby mode.
b. Press “4”, followed by “4” to enter the “Feature Call”
menu.
c. Press ADD (Left) soft key to add a new entry of
feature call.
d. Key in the name of feature call, like editing a
phonebook entry, i.e. “PBX Transfer”.
Press
SAVE (Left) soft key to confirm.