EnGenius EOC-2610 User Manual Download Page 36

Page: 36 / 60

Long Range Wireless Access Point / Client Bridge

Version 1.0

Transmit Power

: You may have the different application distance of the device by

selecting a value from the drop-down list. This feature can be helpful in restricting the
coverage area of the wireless network.

You can arrange the different data rate in distance in Access Point mode. Please

refer below table. The table only for 11g and 11b/g mix mode

6M-24M

36M

48M

54M

High

Great

Ultra High

Great

N/A

Super

Great

NA N/A

Extreme

Great

N/A N/A N/A

Fragment

: Packets over the specified size will be fragmented in order to improve

performance on noisy networks.

RTS Threshold

: Packets over the specified size will use the RTS/CTS mechanism to

maintain performance in noisy networks and preventing hidden nodes from
degrading the performance.

Protection Mode

: If your wireless network is using both 802.11b and 802.g devices

then it is recommended to enable this feature so that the 802.11b devices will not
degrade the performance of 802.11g devices.

Distance (1

30km)

: Specify a distance between 1 and 30Km.

Click on the

Apply

button to save the changes.

5.5

Management

Click on the

Management

link on the

navigation drop-down menu. You will then
see six options: administration, SNMP
settings, backup/restore settings, firmware
upgrade, time settings, and log. Each option
is described below.

5.5.1 Administration

Click on the

Administration

link under the

Management

menu. This option allows

you to create a user name and password for the device. By default, this device is
configured without a user name and password

admin

. For security reasons it is

highly recommended that you create a new user name and password.

Summary of Contents for EOC-2610





























































Search results

Summary of Contents for EOC-2610

Reviews:

Related manuals for EOC-2610

Brands by name

Popular brands

EnGenius EOC-2610, User Manual

Search results

Summary of Contents for EOC-2610

Reviews:

Related manuals for EOC-2610

Brands by name

Popular brands