Long Range Wireless Access Point / Client Bridge
Version 1.0
32
IP Network Setting
: Select
Obtain an IP address automatically (DHCP)
radio
button if the Access Point is connected to a DHCP server. This will allow the Access
Point to pass IP addresses to the clients associated with it. You may select
Specify
an IP Address
radio button if you would like the device to use a static IP address. In
this case, you would be required to specify an IP address, subnet mask, and default
gateway IP address.
IP Address
: Specify an IP address
IP Subnet Mask
: Specify the subnet mask for the IP address
Default Gateway
: Specify the IP address of the default gateway.
Click on the
Apply
button to save the changes.
5.3.3 Spanning Tree Settings
Click on the
Spanning Tree
link under the
System
drop-down menu Spanning-Tree
Protocol is a link management protocol that provides path redundancy while
preventing undesirable loops in the network.
Spanning Tree Status
: Choose to enable or disable the spanning tree feature.
Bridge Hello Time
: Specify the number of seconds for the hello time.
Bridge Max Age
: Specify the number of seconds for the max age.
Bridge Forward Delay
: Specify the number of seconds for the bridge forward delay.
Priority
: Specify the number of seconds for the priority.
Click on the
Apply
button to save the changes.
