Long Range Wireless Access Point / Client Bridge
Version 1.0
27
Time
Settings
Click
on
the
Time Settings
link under the
Management
menu. This page allows you
to configure the time on the device. You may do this manually or by connecting to a
NTP server.
Manually Set Date and Time
: Specify the date and time
Automatically Get Date and Time
: Select the time zone from the drop down list and
then specify the IP address of the NTP server.
Click on the
Apply
button to save the changes.
Log
Click on the
Log
link under the
Management
menu. The
Log
page displays a list of
events that are triggered on the Ethernet and Wireless interface. This log can be
referred when an unknown error occurs on the system or when a report needs to be
sent to the technical support department for debugging purposes.
Syslog
: Choose to enable or disable the system log.
Log
Server IP Address
: Specify the IP address of the server that will receive the
system log.
Local
Log
: Choose to enable or disable the local log.
Click on the
Apply
button to save the changes.
