Long Range Wireless Access Point / Client Bridge
Version 1.0
18
Wireless
Click on the
Wireless
link on the navigation
drop-down menu. You will then see four
options: wireless network, wireless MAC filter,
WDS link settings, and wireless advanced
settings. Each option is described below.
Wireless
Network
The
Wireless Network
page allows you to configure the wireless mode, channel,
SSID, and security settings.
Wireless Mode
: Depending on the type of wireless clients that are connected to the
network, you may select
B
,
G
,
B/G-mixed or Super-G
. If you are not sure about
which clients will be accessing the wireless networks, it is recommended that you
select
B/G-mixed
for the best performance.
Super-G
is a proprietary mode which combines all channels into a single channel to
maximize the through-put up to 200%. Please be aware that Super-G works only with
other Super-G supported devices.
Channel
: Select a channel from the drop-down list. The channels available are
based on the country’s regulation. When selecting Infrastructure mode, a channel is
not required, however, when selecting Adhoc mode, you must select the same
channel on all points.
Wireless Security - WEP
Security
Mode
: Select
WEP
from the drop-down list if your wireless network uses
WEP encryption. WEP is an acronym for Wired Equivalent Privacy, and is a security
